-
PE protective film is a high-performance surface protection tape
Product description PE protective film is a high-performance surface protection tape. It is made of PE substrate single-sided coating of acrylic solvent-based adhesives made. According to the different density into high-density polyethylene protective film, medium density polyethylene and low density polyethylene. Features ● Suitable stickiness: easy to paste easy to tear. ● Stripping force stability: with little change, that is, the smaller increase in peel strength, the better. ● Weathe... -
3M medical tape of Transpore and Micropore with paper
Product description 3M medical paper tape, breathable exceptionally strong, remove the tape will not cause pain, Tiefu strong, anti-sensitive formula. Can be used to fix the insulin pump needle and catheter, economic and durable, Doberman ear ear ears and so on. Features ● Full-thickness perforated polyethylene backing, low-sensitivity pressure-sensitive adhesive. ● Transparent and easy to observe, good ventilation, strong initial viscosity. Scope of application Applicable to the clinical in... -
Die cutting Masking discs and dots with Filters, Venting and Fabric
FILTERS, VENTING, FABRIC Kingzom offers die cutting Masking discs and dots, mesh, fabric and porous plastic vents with zoned adhesive, used in numerous applications. Fabric, filter and venting materials act as barriers to dust, dirt and moisture, protecting the components within a product while allowing air and sound to pass. The innovative Porex Porous Venting material can be used to create a breathable seal that minimizes internal pressure and moisture condensation while eliminating the... -
Die cutting sponge foam tape with PVC and silicone
Die Cut Foam, Sponge Cushioning, sealing, gasketing, absorbing and gap-filling are just a few of the applications where foams and sponges are utilized. Kingzom offers die cutting foam tape solutions of different density, thickness and composition based on the requirements of your application. We also have the capabilities to laminate the foam with adhesive to create a more dynamic part. We work with industry leading manufacturers of high performance foams like Rogers PORON® foams, Roger... -
Die cutting tape with acoustic mesh materials for electronic devices
Acoustic Mesh In today’s consumer electronic devices, it is an important part of the product design to protect components from dust, water and other contaminants. This is particularly imperative to audio, microphone and acoustic components that require protection while also allowing sound to pass clearly. Acoustic Mesh is acoustically transparent while acting as a barrier to dust and water, protecting and extending the life of the device. Kingzom converts a variety of Acoustic Mesh Ma... -
3M TAPES, TESA TAPE, NITTO TAPE, Kapton tape, sony tape, Poron tape
We are agents of many major production brands such as 3M, Nitto, Tesa, Poron, Adchem … Main: Goldfinger tape, Teflon tape, double-sided tape, Conductive tape, anti-static tape, shading tape, PET double-sided tape, cable leather belt, Mara tape, electrical tape, Circuit board tape, acetate cloth tape, glass fiber tape, green tape, retaining wall tape, high temperature masking tape, Copper / aluminum foil tape, and other special tape. And special distribution 3M tape, TESA Tesa tape, SONY S... -
High Temperature Heat Resistance Polyimide silicone adhesive Tape for PCB/3D Printer
High Temperature Heat Resistance Polyimide silicone adhesive Tape for 3D Printer Kingzom Polyimide Tapes are designed For the adhesion and class H insulation of electronic switch, motor, transformer, relay, wires, coil, capacitor and lithium battery. Features * High electrical strength * Peeled off without leaving an adhesive residue * Up to 500℉/260℃ temperature resistance * Class H insulation * Width: custom slit Application * Surface assembly, for the protection of golden finger in w... -
Acrylic Pressure-sensitive Adhesive 3M Double Sided Tapes
Product Description 3M double-sided adhesive glue made from acrylic, color is white translucent; is an easy to operate, double-sided adhesive generic type, durability, good heat resistance, short-term temperature of 120 ℃, long-term temperature resistance 90 ℃; water resistance, good elasticity, strong stick. 3M double-sided tape environmentally friendly, in line with ROHS, PFOS regulations, widely used in the processing industry, including adhesive rubber industry, rubber and plastic, su... -
PCB masking tape, 3M 851 green tape for Greenback Printed Circuit Board Tape 851
Circuit Plating 3M 851 green tape with polyester film and blended silicone and rubber adhesive used for PCB masking and other high temperature applications. Thick adhesive coating. Green, 4.0 mil thick. Polyester backing reduces stretch and recovery of tape associated with uneven stop-off line Thick adhesive coating reduces undercutting because adhesive blocks out solutions between fingers Specially designed adhesive that generally performs better when no ovens are used to heat tape and boar... -
Double-sided coated kapton silicone tapes for PCB manufacture
kapton Double-sided coated silicone tapes for PCB manufacture construction Physical parameters Project Units Value Mark Color Amber Carrier thickness mm 0.025 ±0.005mm Total thickness mm 0.1 ±0.005mm Steel peel force N/25mm A side 5±0.5 B side 7±0.5 Tensile Strength N/25mm ≥115 Elongation at break % ≥35 Withstanding Voltage KV ≥5 Length m 33 Liner thickness mm 0.075 Temperature ℃ 250 Features Excellent heat resistance, electrical insulation, chemical res... -
Red Circuit Plating Tapes 1280, used for PCB masking tape or other high temperature applications
Red Circuit Plating Tape 1280 with polyester film used for PCB masking tape or other high temperature applications. Red. 3.6 mil thick. Low stretch polyester film for machine, as well as hand application Solvent clean up of the board is recommended to facilitate subsequent soldering Polyester backing reduces stretch and recovery of tape and associated uneven stop-off line Thick adhesive coating reduces undercutting because adhesive helps block out solutions between fingers Polyethylene tape ... -
Clear Polyester/Silicone Tapes for PCB masking solder
Polyester/Silicone Tape 852RW with polyester film and silicone adhesive is used for PCB solder masking and other high temperature applications. Clear. Abrasion, chemical and thermal resistant Higher heat resistance as compared with acrylics Easy and clean removability Polyethylene tape core instead of cardboard Specifications Adhesion to Stainless 35 oz/in Adhesion to Stainless (metric) 1.0 kg/25.4 mm, 3.8 N/cm Adhesive Type Silicone Application Category Protection... -
Cream Polyester Tape 3M854 with excellent chemical resistance for precious metal plating
Cream Polyester Tape 854 is an opaque, cream colored polyester tape with excellent chemical resistance for precious metal plating, especially gold. Excellent chemical resistance in precious metal plating, especially gold Polyester backing helps reduce failure from backing breakdown and shrinkage Flexible backing helps reduce failure from cracking Synthetic adhesive helps reduce failure from splice slippage because of good chemical resistance Excellent results in sodium hydroxide etching of a... -
High performance pressure sensitive Transparent Blue PCB PVC Protective Tape
Properties: PCB Transparent Blue Protective Tape with lead free is a thin premium grade plasticized pvc film coated with an aggressive rubber based adhesive.It is highly conformable and unaffected by most chemicals and moisture. Its meet Rohs Requirment. Recommended uses : PCB Transparent Blue Protective Tape design for PCB and stainless steel plate, its use for PCB, instrument surface protection. Its protection the suface during manufacturing the products. Characteristic: 1. softening p... -
Die cutting Masking Tapes for PCB protective
Product Description Masking Tape is a gold coloured specialty masking tape with a flat paper backing and a synthetic adhesive, well suited for holding, bundling, sealing and paint masking, particularly where exposure to sunlight is expected. Key Features Masking Tape can be used for a wide range of masking applications, especially for applications where UV resistance and clean removal is required and with an optimum temperature of 100°C for 30 minutes. Advantages Flat paper backing, synthet... -
High Temperature Masking Tape developed for wave solder masking of P.C. Board.
Specifications 1.crepe paper material 2.rubber adhesive 3.hot melt type 4.masking in paint 5.3m masking tape Intruduction: This tape is developed for wave solder masking of P.C. Board Features: 1.It has been laboratory tested on painted panels and found to remove cleanly at bake temperatures of up to 121 °C for around an hour 2.Excellent transfer resistance to “difficult to remove from” surfaces like EDPM rubber moldings. 3.Tests indicate it is better than conventional maski...